Electrothermal
Electromantle Extraction Heaters. Electrothermal
The Electromantle Extraction Heaters offer a choice of three or six recesses. Individual built-in solid-state electronic controls enable easy regulation of each heater, while removing sparking associated with mechanical switching. Units include three 0.5"(12.7mm) diameter support rods. External surfaces are PTFE-coated and resistant to most chemical solutions. The robust construction permits continuous operation of the units as required by routine extraction tests. Element temperature[…] Electrothermal
Electromantle Extraction Heater-Stirrers. Electrothermal
The Electromantle Extraction Heater-Stirrers offer a choice of three or six recesses. Individual built-in solid-state electronic controls enable easy regulation of each heater, while removing sparking associated with mechanical switching. These models incorporate a stirring module that allows the solution to be stirred and heated at the same time. There is one stirring control for each set of three recesses. Stirring speed range is 50 - 1000 rpm. Units include three 0.5"(12.7mm) diameter[…] Electrothermal
Immersion Heating Rods
The "Red Rod" is a true radiant heater. Infrared radiation passes through quartz with very little absorption, so that a large proportion of heat is transferred to the liquid. The heating element is covered by a quartz sheath that is chemically resistant to most solutions (excluding hydrofluoric acid, phosphoric acid and concentrated caustic alkalis). No installation is necessary; the heater simply rests against the side of the vessel. Heat the contents of multi-neck flasks allowing full[…] Electrothermal
Unimantle Basic Heating Mantle
The Unimantles are economical heating mantles that are ideal for use in teaching and industrial laboratories. Temperature range of 450°C. Dedicated size mantles available from 50 to 2000 ml. Flexible designed heating element ensures efficient heat transfer and fast boiling times. Heating element is non-replaceable. Requires external controller (see H1630). High efficiency ceramic fiber thermal insulation ensures heat is concentrated on the glassware and the outer case remains stable[…] Electrothermal
Controlled and Grounded Heating Mantles
Vented case creates a unique airflow that allows housing to be safe to the touch when in use. Outer housing is constructed of chemical resistant and resilient polypropylene minimizing damage from spillage. The coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support. Built-in temperature controller regulates temperatures from ambient to 450°C. The flexible heating element ensures minimum risk of flask breakage. Heating[…] Electrothermal
CM Metal Case Heating Mantles with Controller
Eight CM series mantles sizes available from 50 to 5000 ml. Aluminum housing is chemical resistant, tough, lightweight and easy to clean. The stainless steel grounding screen provides added protection. Built-in controller regulated element temperature to 450°CReplaceable heating cartridges. Unique airflow through ventilation slots beneath and around the rim and case keeps the exterior safe to touch. Flexible coiled heating element provides good heat transfer while absorbing shock,[…] Electrothermal
CMV V-Shaped Metal Case Heating Mantles with Controller
The CMV Mantles are designed to provide versatile heating capabilities for a wide range of larger sized flasks and 60° funnels. Aluminum housing is chemical resistant, tough, lightweight and easy to clean. The stainless steel grounding screen provides added protection. Built-in controller regulated element temperature to 450°C. The heating element is multi-circuit: when smaller vessels are being used the upper heating element can be switched off to avoid wastage and possible[…] Electrothermal
EMA Heating and Stirring Mantles. Electrothermal
The EMA series mantles combine the traditional Electrothermal heating elements with easily controlled solid state stirring. Outer housing is constructed of chemical resistant and resilient polypropylene minimizing damage from spillage. Vented case creates a unique airflow that allows housing to be safe to the touch when in use. Grounding screen provides additional safety should spillage or flask breakage occurs. Heating cartridge can be quickly and easily replaced in the event of failure.[…] Electrothermal
EMV Plastic Housing V-Shaped Heating Mantles w/Controller
EMV models are designed with a stainless steel screen covering the heated elements that protects the operator from shock hazards due to spills or flask breakage. Durable polypropylene housing is chemically resistant. Unique patented airflow through ventilation slots beneath and around the rim of the case ensures a low, cool temperature. Built-in electronic controller regulates heating element from ambient to 450°C. Coiled heating element is suspended within a thermal insulating[…] Electrothermal
EMX Plastic Housing Spill-Proof Heating Mantle w/Controller
EMX units are designed with a built-in stainless steel liner that gives electrical and mechanical protection against spillage and enables easy cleaning. Durable polypropylene housing is chemically resistant. Unique patented airflow through ventilation slots beneath and around the rim of the case ensures a low, cool temperature. Built-in electronic controller regulates heating element from ambient to 450°C. Coiled heating element is suspended within a thermal insulating cartridge to[…] Electrothermal
Single or Double Place Temperature Controller. Electrothermal
These single or double placed controllers are percentage off/on proportional controllers. Can be used with almost any heating mantle. Electrothermal
Set-Temp® Digital Temperature Controller
The Set-Temp® Digital Temperature Controller is ideal for heating tapes, cords and mantles. Non-volatile memory retains temperature settings during power interruptions. Models are available for use with Type-K or Type-J thermocouples. In instances where the thermocouple cannot be placed precisely where temperature sensing is needed, a temperature offset can be introduced to make the control's temperature readout more meaningful. If the control loop is broken, Set-Temp Digital[…] Electrothermal
Slide Drying Bench. Electrothermal
Dry slides across the drying bars, angled on the bars or lying flat without bars. Temperature ranges from slightly above ambient to 100°C. Accepts up to 50 slides. Clear light indicates when power is on; amber light indicates when the heater is on. Temperature control is provided by a built-in energy regulation with a temperature range to 100°C. Reference dial and knob allow the temperature to be closely adjusted and regulated. Painted aluminum top reduces glare, offering a[…] Electrothermal
Paraffin Section Mounting Bath
This Paraffin Section Mounting Bath allows easy manipulation of the section to avoid problems with wrinkles, folds and distortions. Excess or damaged surfaces can be easily removed by skimming a filter paper over the water surface. 2.5 liter one piece black interior is easy to clean and provides constant clear visibility of the sample. Aluminum exterior with polypropylene lid is durable and easy to clean. Easily replaceable heating element. Built-in controller regulates the temperature[…] Electrothermal
Paraffin Wax Dispenser
Thermally insulated tap heater with independent temperature control eliminates wax solidification. Provides immediate "Wax on Tap". Anodized black interior. Stove enameled black and white aluminum exterior and a black metal lid are durable and easy to clean. Capacity of 1 gallon (4.5 liters). Built-in controller provides temperature control from ambient to 75°C. A non-drip swivel lever with replaceable filter makes the dispensing of wax easy. Tap heater maintains temperature within the[…] Electrothermal
Digital 9000 Series Melt Point Apparatus
The Digital 9000 Series Melting Point Instruments have an adjustable extension arm that facilitates comfortable viewing and helps reduce operator fatigue. The viewing head can be rotated for easier viewing and folds flat for easy and compact storage. Object lens can be adjusted to sharpen the focus on the sample. Safety eyepiece reduces glare and protects your eyes from contact to the hot zone. An integral light enhances sample observation and an 8 x wide angle viewing magnifier that[…] Electrothermal
Digital Mel-Temp® 3.0
Designed for determinations of melting points using glass capillary tubes. Used for recording beginning and ending points of each of three samples. Space saving design; occupies only 4.6" x 6.1" (11.7 x 15.5 cm) of bench space. Easy to follow instructions are printed directly on the front of the unit. Sample observation is enhanced by an integrated light and precision 6X lens. Safety eyepiece protects your eyes from contact with the capillary tubes. Digital microprocessor with 0.1°C[…] Electrothermal
Manual Mel-Temp®
The Manual Mel-Temp® provides precise melting points up to 500°C. Simple manual controls adjust the heating rates. Accepts up to three samples simultaneously using glass capillaries. Simple to operate: bring oven to a stable temperature, insert capillary tubes, adjust heating rates and record melt temperature when sample(s) melt. Aluminum casting conducts and radiates heat uniformly to capillaries and thermometer. Heating chamber consists of aluminum heating block that avoids the[…] Electrothermal
Macro-Kjeldahl Heating Rack. Electrothermal
This Electrothermal Macro-Kjeldahl Heating Rack accepts flask volume sizes from 8 - 800 ml. Robust aluminum construction permits operation of the units as required by extraction and distillation processes. Individual built-in controllers regulate quartz fiber heating elements up to 800°C. "Heater On" light for each recess indicates when power is being supplied to the heater. Back mounted brackets hold flask rest rods that are supplied with each unit. 115 VAC (230V is available).[…] Electrothermal
Micro-Kjeldahl Heating Rack
This Electrothermal Micro-Kjeldahl Heating Rack accepts flask volume sizes from 18 - 50 ml. Robust stainless steel case minimizes damage from spillage. Individual built-in controllers regulate quartz fiber heating elements up to 550°C. "Heater On" light for each recess indicates when power is being supplied to the heater. Six individual recesses at 2.8" (7.2 cm) centers allow you to conduct single or multiple digestions. Each unit is fitted with adjustable clamps to accept the standard[…] Electrothermal