Products / Condensers
PYREX® West Condensers
This condenser is designed with a heavywall outer jacket to provide a sturdy longlasting unit while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same side to reduce breakage and the adapter ends are all tooled for No. 3 rubber stopper fit. The tubulation O.D. is approximately 10mm. Corning
KIMAX® West Condenser
KIMAX one-piece sealed unit with an inlet end tooled to accept a # 3 rubber stopper. Sloped to avoid trapping condensate. Inner tube is light-walled with a small diameter jacket to keep minimal space between them. Hose connections accept 5/16 inch I.D. flexible tubing. Kimble Glass
KIMAX Extraction Condenser Only
Replacement extraction condensers for E1442 apparatus. Kimble Glass
PYREX® Liebig Condenser w/Sealed Inner Tube
A general purpose condenser that can be used for distillation and extraction. Although the condensing area per unit length of the jacket is low the large capacity water jacket gives efficient cooling. Approximate tubulation O.D. is 10mm. The adapter end is tooled for uniform stopper fit accommodating a No. 3 rubber stopper. Corning
KIMAX® Allihn Condenser w/Drip Tip and 24/40 Joint
KIMAX one piece sealed unit with a {standard_taper_symbol} outer joint at the inlet and a {standard_taper_symbol} inner joint at the outlet. Inlet end is sloped to avoid trapping condensate. Inner tube has bulbs blown within it along its length. Drip tip is provided at the lower end. Hose connections accept 5/16 inch I.D. flexible tubing. Designed from Federal Specification NNN-C-1504, Type III. Kimble Glass
PYREX® Liebig Condenser w/Drip Tip & Inner TS Joint
A general purpose condenser that can be used for distillation refluxing and extraction operations. Top accepts #3 stopper, inner ts joint at the bottom with a drip tip. The tubulation O.D. is approximately 10mm. Corning
KIMAX® Liebig Condenser w/Drip Tip & Full Length 24/40 Joints
KIMAX one-piece sealed unit with a {standard_taper_symbol} outer joint at the inlet and a {standard_taper_symbol} inner joint at the outlet. Inlet end is sloped to avoid trapping condensate. Drip tip is provided at the lower end. Hose connections accept 5/16 inch I.D. flexible tubing. Suitable for use with ASTM D849. Kimble Glass
KIMAX® West Condenser w/Drip Tip and Medium Length 14/20 Joint
KIMAX one piece sealed unit with a {standard_taper_symbol} outer joint at the inlet and a {standard_taper_symbol} inner joint at the outlet. Inlet end is sloped to avoid trapping condensate. Inner tube is light-walled with a small diameter jacket to keep minimal space between them. Hose connections accept 5/16 inch I.D. flexible tubing. Kimble Glass
PYREX® West Condenser w/Drip Tip, Inner and Outer TS Joint
This condenser is designed with a heavywall outer jacket to provide a sturdy longlasting unit while the inner tube has a thinner wall for efficient heat transfer. Tubulations are on the same side to reduce breakage. With the outer ts joint at the top and the inner ts joint at the bottom with a drip tip. The tubulation O.D. is approximately 10mm. Corning
PYREX® Liebig Condenser w/Drip Tip, Inner and Outer TS Joints
A general purpose condenser that can be used for distillation and extraction. Suitable for use in vacuum distillations. With the outer ts joint at the top and the inner ts joint at the bottom with a drip tip. The tubulation O.D. is approximately 10mm. Corning
PYREX® Graham Condensers w/Drip Tip, Inner & Outer TS Joints
This condenser has a high surface area per unit length of jacket. Primarily used in vacuum distillations. With the outer TS joint at the top and the inner TS joint at the bottom with a drip tip. The tubulation O.D. is approximately 10mm. Corning
PYREX® Allihn Condensers w/Drip Tip, TS Inner & Outer Joints
These widely used PYREX® condensers have a greater surface area than the corresponding Liebig type and are suitable for use in vacuum distillations. They have an outer TS joint at the top and an inner TS joint at the bottom with a drip tip. The tubulations have an O.D. of approximately 10mm. Corning